10

Important:

The injection procedure is quiet. Use the light bar to check the injection status.

Always hold BETACONNECT straight up and down. Keep it pressed against your injection site for as long as the

injection lasts.

Step 6: When the injection is finished

BETACONNECT will sound 2 short beeps and show a

blue, flashing bar after the injection is complete and the

needle is withdrawn.

Do not remove BETACONNECT

from the injection

site until the injection is complete.



BETACONNECT will automatically power down once

the injection is complete.

3.3

Removing the used syringe and needle

Step 1: Open the lid

Press the blue lid release button on the side of the

BETACONNECT, and fully open the lid.

Step 2: Remove the used syringe

Remove the syringe by gently lifting it straight out of the

BETACONNECT.



Hold BETACONNECT

with your other hand while

removing the syringe. Check the syringe to be sure the

entire dose was delivered.

Important:

Take care to avoid the needle when you remove

the empty syringe. It could injure you or others.

Do not put the needle cap back on the syringe.

Always dispose of your empty syringe promptly, using an

appropriate sharps container

.

Step 3: Disposing of Used Needles and Syringes

Put your used BETASERON syringe and needle in a FDA-cleared sharps disposal container right away after use.